Category Archives: DIY

Children’s Artwork Display for Less Than $5

This is one of my favorite projects to date – also the easiest and least expensive: the children’s artwork display located in our Family Command Center  – otherwise known as the mud room.

Children's Art Display Less than $5  |  Five Marigolds

I wanted plenty of space where the children could hang their artwork and good grades with pride, without that messy cluttered look on the fridge. It also needed to be really flat to the wall, since the area I’d designated is in a space the width of a hallway.

Here’s how I did it:

  • Buy these eye hook screws and wire at the hardware store for less than $5 total (or spend a few extra bucks and shop Amazon at the links above if you want to save a trip to the store).
  • Drill holes into the wall where you want your eye hooks to go. Screw the eye hooks into the wall by hand.  Then, wrap your wire around one of the hooks a few times. Stretch it to the other eye hook, pulling and straightening as you go. Wrap it around that eye hook 2-3 times and cut the wire.
  • I already had these cute little inexpensive clips on hand, leftover from Eve’s party favors.They work great for holding the various art and school papers the kids bring home.
  • Voila! Children’s art center complete in 20 minutes and for less than $5.

Children's Art Display Less than $5  | Five Marigolds

These photos. They’re bad. This is a tricky, low-light place to take photos with horrible orangey-pink energy-saving bulbs. Forgive me. You get the idea, right? What do you think of my low-tech art center?

Children's Art Display Less than $5 | Five Marigolds

Rustic Industrial Boy’s Room on a Budget

This week we finally finished my vision for lights and feature art above Dub’s bed.

Our home didn’t come with overhead lights standard in the bedrooms, so we needed lamps that would put out a lot of light. I struggled to find the right look for his room, because I discovered most lamps max out at 60 watts, and we really needed two 150 watt lamps to adequately light the space.

I was inspired with looks like these:

DIY Vintage Industrial Lamps for Boys Room | Five Marigolds

Elegant Lighting 1 Light Armed Sconce

DIY Vintage Industrial Lamps for Boys Room | Five Marigolds

West Elm Industrial Task Clamp Lamp $69

DIY Vintage Industrial Lamps for Boys Room | Five Marigolds

Restoration Hardware 1900s Pharmacy Sconce $209

DIY Vintage Industrial Lamps for Boys Room | Five Marigolds

Millennium Lighting Neo-Industrial 1 Light Wall Sconce $69.90

DIY Vintage Industrial Lamps for Boys Room | Five Marigolds

Troy Lighting Telegraph Hill 1 Light Wall Sconce

I was looking for something industrial and rustic to fit his space, but didn’t want to break the bank.

That’s when I landed on these clamp lights. They fit the look I was going for, are  just $15 each, and are compatible with up to 300 watt bulbs. I also found this option that is even less expensive and still goes up to 150 watts, but I loved the look of the cage on the lights I chose, and figured they would help prevent touching the bulbs while in use.

Once I landed on the lights, I needed a way to affix them to his wall. I bought these Ikea Shelf Brackets for just $4 each, drilled holes for the cords, and stained them to match his the DIY frames on his wall gallery.

We placed them wide enough on the wall that the placement will still work when he graduates to a full bed in the coming years.

We liked this look as it was, but we decided to give it a more custom look with vintage look fabric electrical cords. We chose the black and white zig zag pattern, but there are so many nice options here that it was hard to choose!

DIY Vintage Industrial Lamps for Boys Room | Five Marigolds

Industrial Clamp Light Boy's Bedroom Design | Five Marigolds

Industrial Light for Boy's Bedroo | Five Marigolds

Now, if you’re trying this yourself and are working with a low watt light, a very inexpensive option is this cord from Ikea. However, this is only a two wire cord so you’ll want to make sure it’s compatible with your light. It also only works up to 40 watts (400 lumen) which in my house is no bueno.

I think these turned out fantastic, but I still debate weather I should spray paint them or weather the metal down the line. There are so many possibilities with these as he grows and his room evolves.

Industrial Monogram Pallet Sign. | Five Marigolds

Industrial Boy's Bedroom Design. | Five Marigolds

When this project was complete, we spent a total of $75 for the two lights and fixtures – at least half what I would have paid for 2 of my inspiration lights.

These look great when they’re hanging, but Dub also loves the way that they can be used as a spotlight when we use the clamp to adjust them on the bracket.

Rustic Pallet Wall Art for Boys Room | Five Marigolds

For the art above his bed, my dad removed these boards from a pallet using a reciprocating saw. I loved the way these boards were of varying wood stains and colors, so I used all of them together. My husband then screwed these boards to several 1×2 boards. He then added this galvanized letter that I found at Hobby Lobby.

I’m not done with his room quite yet, but I’m happy with the progress we’re making!

Are you considering using industrial shop lights or pallet wood for a traditional indoor space? Let me know if you have any questions and I’d be happy to answer them for you!

In addition to the fabulous blogs listed on the sidebar, this post was linked up at Lolly Jane.

 

*This post contains some affiliate links. Please see my affiliate disclosure in the sidebar.

 

Copycat Chic: Anthropologie Striped Heart Tank for less than $5

I was browsing Anthropologie recently and fell in love with this Striped Heart Tank by Sundry:

Copycat Chic: Anthropologie Striped Heart Tank for less than $5 | Five Marigolds

So. cute. But the price tag is not so cute. $70 for a cotton tank? No thanks! But it kept popping up in my Facebook feed, willing me to buy it.

That’s when I decided to try to make it myself, but finding a plain white tank was a lot harder than I expected. I ended up just getting a Faded Glory tank from Wal-Mart on a recent grocery trip.  It was the first white tank I found without a pocket, and at $3.96, the price was right!

I whipped up an 8″ x8″ template in Photoshop:

Copycat Chic: Anthropologie Striped Heart Tank for less than $5 | Five Marigolds

I then loaded the pattern into my Silhouette software. My usual method is to use clear contact paper in my Silhouette to make a template because you can get a giant roll for less than $5. Then I use a Tulip soft fabric paint, making sure to insert cardboard into the shirt first to prevent bleeding to the other side. The best part of this application method is that it’s incredibly inexpensive and long lasting.

This time, however, I happened to have some leftover heat transfer vinyl  from a project last year. I ran my design through the Silhouette, removed the excess vinyl, and ironed it on.

Copycat Chic: Anthropologie Striped Heart Tank for less than $5 | Five Marigolds

Next, I added a bit of contrast stitching along the bottom hemline  to give it a more expensive, custom look.

Copycat Chic: Anthropologie Striped Heart Tank for less than $5 | Five Marigolds

I adore this tank and have gotten so many compliments on it. When Eve first saw it, she insisted on a matching tank (I found two great , inexpensive options here and here). I just shrunk the template slightly ( to about 5.25″ x 5.25″) and applied it using the same method. Again, in retrospect I probably would have gone bigger for this one, as well. For this top, I did more stitching to more closely replicate the inspiration top. Instead of using the sewing machine, I hand stitched the hemlines using flossing thread to get that perfectly imperfect look.  think it’s even cuter in this mini size!

Copycat Chic: Anthropologie Striped Heart Tank for less than $5 | Five Marigolds

I hope you’re a fan of my copycat chic Striped Heart Tank. Thanks for stopping by!

 

 

*This post contains affiliate links. Please read my affiliate disclaimer in the sidebar.

Copycat Chic: Anthropologie Keepsake Brooch Knob

Copycat Chic: Anthropologie Keepsake Brooch Knobs. Get the look for less with rhinestone brooches and inexpensive cabinet pulls | Five Marigolds

I was dreaming of a very feminine, girly-girl look for the girls’ shared Jack and Jill style bathroom when I stumbled across these gorgeous Anthropologie Keepsake Brooch Knobs. They were perfect! But as I did the math, I just couldn’t justify spending $120 for seven pulls (including shipping and tax) in this particular room.

Copycat Chic: Anthropologie Keepsake Brooch Knobs | Five Marigolds

I searched high and low and found a few options for less. If you’re not the DIY type, these are great options for getting this glam look for less.

I like these (smaller) jeweled pulls from Hobby Lobby. Pair them with their weekly 40% off coupon and the patience of a saint and you could score each of them for $4.20 each before tax.

Copycat Chic: Anthropologie Keepsake Brooch Knobs | Five Marigolds

Or how about these, much more simple, rhinestone knobs? You just can’t beat that price –  only $1 each!

Copycat Chic: Anthropologie Keepsake Brooch Knobs | Five Marigolds

I wanted to try to replicate my inspiration knobs from Anthropologie as much as possible for quite a bit less, and came up with these.

Look for less- Anthropologie Keepsake Brooch Knobs | Five Marigolds

Aren’t they lovely? Here’s how I made them.  I bought these pretty rhinestone brooches – the closest match I could find to my inspiration knobs – just $2.25 each, total.

I then bought these inexpensive drawer pulls for $1.28 each. It is important that the diameter is close to the size of the brooches – not only to make it easier to affix, but for the long term durability of the knobs. I’ve seen other bloggers attempt to affix a brooch to a much smaller knob or pull, which significantly impacts long-term durability. The aim is that you will naturally pull using the knob and not the brooch. I was able to achieve that with this combination.

Copycat Chic: Anthropologie Keepsake Brooch Knobs. Get the look for less with rhinestone brooches and inexpensive cabinet pulls | Five Marigolds

I then used some Marine JB Weld epoxy we had on hand to attach the brooch to the knob. Since these fit so perfectly together,  we just hooked the brooch pin over the knob for simplicity, and then used the epoxy. I’d originally planned to remove the pin fixtures from the brooch and then affix the epoxy around the outer diameter of the knob, but this way was far easier and worked just as well.

If you’re not familiar with JB Weld epoxy, it’s a product that works as a chemical weld. It’s meant for marine purposes and is water proof. These babies are not coming apart any time soon!

The grand total for this project was just shy of $25 for seven knobs – that’s just $3.50 per knob. I saved nearly $93 compared to my inspiration hardware!

Here is what they look like installed. I think they add the right amount of sparkle to this shared little girl bathroom.

It’s incredibly hard to get a photo because they are in the narrow Jack and Jill bathroom that gets no natural light. Pictures don’t begin to do these beautiful fixtures justice!

Look for less- Anthropologie Keepsake Brooch Knobs | Five Marigolds..

Look for less- Anthropologie Keepsake Brooch Knobs | Five Marigolds.

Look for less- Anthropologie Keepsake Brooch Knobs | Five Marigolds... copy

Thanks for stopping by!

 

 

//
//z-na.amazon-adsystem.com/widgets/onejs?MarketPlace=US

DIY Chalkboard Art

I recently tried to convince my husband to paint an entire wall of our dining area with black chalkboard paint. He didn’t quite have the same vision I had, so he asked me to hang a chalkboard until we could come to an agreement.

I agreed. After all, I’ve had a giant frame in storage that’s been waiting to be used for years. I bought it at a garage sale for around $10 which was a steal…but how do you fill such a large frame without spending a fortune? The chalkboard was the perfect solution.

If I hadn’t already had the frame, what I really would have wanted is a rustic wood frame. However, since this was likely temporary, I wanted to make this as easy and inexpensive as possible.

The problem: the frame was gold. Really gold. I debated on what to paint it. Silver? Weathered white? Blue? I haven’t committed to a color scheme in our new home yet, so I went with a safe, muted silver. I spray painted it with Krylon Brushed Metallic paint. I had planned to rub wax or wood stain to bring out the details, but I didn’t love that effect on the test areas so I just left it silver for now.

For the actual chalkboard,  we bought a piece of thin plywood and I sanded it with a hand sander until it was really smooth. After cleaning it with a lint-free cloth, I painted four thin coats of Rust-Oleum Chalk Paint in black, using a foam roller. I sanded lightly between layers when necessary and removed all the dust with a lint-free cloth. When the paint was completely dry, I rubbed entire board with a large piece of sidewalk chalk to cure it, and then rubbed it with a lint-free cloth to erase it.

DIY Chalkboard Art with Rust-Oleum Chalkboard Paint | Five Marigolds

DIY Chalkboard Art | Five Marigolds

You can wipe it clean with a damp cloth for a clean crisp look, or with a dry cloth, which I prefer, for a true, messy chalkboard look.

So far, our family loves this addition to our home. We post fun quotes and verses, and the children love to use it for creating their own art, as well.

DIY Chalkboard Art using Rust-Oleum Chalkboard Paint | Five Marigolds

DIY Chalkboard Wall Art using Rust-Oleum Chalkboard Paint | Five Marigolds

 

In addition to being shared on the fabulous blogs to the right, this post was also shared on Stone Gable Blog.

Proverbs 31 Art for Girl Room

I’ve been dreaming of this sign for Eve’s room for some time now, but when I recently realized I already had the materials, I got moving.

I had a thrift store canvas that I’d previously tried (and failed) to artistically repurpose, so I painted it using a paint sample I already had on hand. Besides the price, the best part of repurposing a canvas is that you get fabulous texture under your new creation.

I used my Silhouette SD to cut the verse onto clear contact paper. I make so many mistakes that I’ve found this to be a cost saving way to use the Silhouette. I used a slightly imperfect font that would give me grace should the painting not go as I hoped.

Proverbs 31 wall art | Five Marigolds

After spending way to long placing the many pieces of contact paper on the canvas and lining it up just so, I spray painted it with my favorite Rust-Oleum metallic gold spray paint. I was worried it would get under the contact paper. but as long as I made sure the paper was adhering around the letters I had absolutely no trouble.

To build the frame, I used a similar technique as with Dub’s  big kid room wall gallery, but I used wood that wasn’t quite as deep, since I wanted this particular frame flush with the art. I used Minwax stain in Early American, which is lighter IRL and gives it the right amount of color and rustic vibe.

 

Proverbs 31 Subway Art using clear contact paper and Silhouette SD. Stain is Minwax Early American. | Five Marigolds

I debated (and am still debating) taking a tiny bit of wood stain on a rag and dry rubbing the canvas for a subtle shabby chic look. I’ve also considered dry rubbing a tiny bit of the white paint over the frame very lightly for the same reason. But, at this point I’m afraid to ruin it!

Proverbs 31 art | Five Marigolds

I’m so happy with how this turned out. I love the contrast of metallic gold and ivory against the rustic frame, and the sweet reminder my little girl will wake up to each day.

I’m already dreaming of how I might create a variation for Belle’s room 🙂

Proverbs 31 Wall Art.. | Five Marigolds

 

Details:

  • Lamp – Anthropologie (old)
  • Curtains – Simply Shabby Chic
  • Quilt – Handmade by grandma 🙂
  • Paint color – Behr Seed Pearl

In addition to the fabulous blogs listed on the right, this post was featured on Savvy Southern Style and The Turquoise Home.

Big Boy Room Custom Wall Gallery

I’m very slowly beginning the process of decorating our new home, and focusing on the areas where inspiration strikes me the most. Dub’s room is the one I have the most concrete vision for, and I knew exactly where I wanted to start when I saw this idea from Navy Bean Lane.

I immediately set out taking images of the things most important to Dub. He loved being able to be a part of it in this way. I sent the images to the FedEx copy store and ordered 18×24 engineer prints. Not only do I love how they turned out, but you can’t beat the price! All four for around $20.

I then followed the DIY frame tutorial from Young House Love.

DIY Engineer Prints for Big Boy Room | FIve Marigolds

I’m super happy with how this project turned out. Dub and I may or may not have hung out in his room and  just stared at them for awhile. He tells me he plans to use the frames as mini shelves for all his important little treasures. DIY Engineer Prints for Big Boy Room | FIve Marigolds

DIY Engineer Prints for Big Boy Room | FIve Marigolds

Details:

This project was featured over at The Idea Room and  LollyJane.

Also linked up at Craft-O-Maniac  and Remodelaholic.

Minecraft Steve Lego Birthday Party Favor

This year, Dub wanted his birthday to be all about Minecraft. He’s also really into Legos, so a Lego Steve seemed like an appropriate favor for the goodie bags.

I did a lot of research trying to find an easy way to to this. To be honest, I was hoping there would be a sale of Minecraft Lego lots on ebay that would allow me to phone this one in, but it was not to be.

So, I ended up making Steve myself using the Lego Pick-A-Brick feature.

Minecraft Steve Lego Favor | Five Marigolds

While you can do this in-store if you have a Lego retail location near you, they have a varying selection, so I saved myself the trip and did my shopping online. This is where I insert my Lego PSA – I found out after I placed my order that Pick-A-Brick orders can take up to 18 business days! That’s almost a month! So, this favor only really works if you are planning out by at least a month to ensure your Bricks get to you in time.

Here’s what I ordered to make 15 favors:

Item#, color  – quantity

  • 300423, blue – x30
  • 4113915, yellow – x15
  • 4155708, yellow – x15
  • 4163696, light blue – x15
  • 4179833, light blue – x15
  • 4211210, brown – x15
  • 4243821, green – x15
  • 4271949, brown – x15
  • 4579260, yellow – x15

For the pick axe, I had to go to ebay where I got a great deal paying $1.47 total for 15 axes. That brought the total to $26.21 for 15 favors, or $1.74, each. (I didn’t see any swords or pick axes in the Pick-A-Brick section when I was ordering. They do have a “mini Fireman’s axe” or a “warrior weapon,” though.)

Then, I went to work making  a face for Steve in PhotoShop. I measured it to the size of the 2×2 Lego and then I printed it on Avery label paper. Removing the paper backing first,  I cut down each face sticker to the exact size and then replaced it on a small square of the paper backing to place in the favor bag.

Steve Lego Face Free Printable | Five Marigolds

I took a photo of the complete Steve to include with all the kits.
Minecraft Steve Lego Favor Insert Printable web| Five Marigolds

I placed the Legos in a small jewelry ziplock bag. Then, I made a simple tag that I stapled to the top of the sealed bag as a finishing touch.

Minecraft Lego Steve Favors | Five Marigolds

This was a huge hit among the 6 and 7 year old crowd!

Thinking of making a Lego Steve for your Minecrafter’s party? You can get a head start by downloading Steve’s face here (compatible with Avery 5260* labels), the finished Steve image inserts here, and the favor tags here.  Enjoy!

MORE FREE MINECRAFT PRINTABLES: Like these printables? Be sure to check out my other free Minecraft Printables here and here.

 

 

*Please read my affiliate link disclaimer in the sidebar.

Tutorial: Tinsel Tassel Party Banner

I absolutely love the look of these tinsel tassel banners for party decor. Even better? They’re super easy and inexpensive to make.

Dub really wanted a Minecraft-themed birthday party, but I didn’t want a licensed decor explosion, so I began thinking of ways to decorate with color. With lots of Pinterest inspiration, I decided I wanted to give this a try. However, I was surprised to find there aren’t a lot of tutorials out there so I am sharing a quick and dirty tutorial of my own.

I set to work on this particular banner with four colors of tissue paper, green, lime green, chevron and silver metallic (I linked to some examples because I initially had a hard time finding these).

1) First, I took a stack of 8 sheets of tissue in each color and cut them the short length of the pre-cut sheets (approximately 20″) and cut them about 8″ wide.Tinsel Tassel Banner Tutorial | Five Marigolds

2) I then folded the stack of sheets in half and began cutting them in 1/4″ strips, stopping about 1″ from the fold. I used a rotary cutter and mat to make quick and more precise work of this, but regular scissors will do.

Tinsel Tassel Banner Tutorial | Five Marigolds

Tinsel Tassel Banner Tutorial | Five Marigolds

3) I then unfolded the papers and, taking 2 sheets at a time, began rolling them tightly at the center. Once each set of 2 was rolled at the center I began gently twisting the rolled portion. Once it was lightly twisted I folded it in half and began twisting the rolled portions together. When you’re done it will look something like this. Perfectly imperfect.Tinsel Tassel Banner Tutorial | Five Marigolds

4) Thread the tassels through a string or ribbon. I made a single simple knot at each tassel to keep them in place.

Tinsel Tassel Banner Tutorial | Five Marigolds

All in all, this was a pretty quick and easy project that took me maybe 20 minutes total to complete. I also love that if you source your papers from the dollar store, you could complete three of these banners for just $4! (meaning, each banner is just over $1, with plenty of paper to spare for favors or gifts). I have a feeling various themed tinsel banners will be showing up at more parties around here!

Dub’s party is not for a few more weeks, so I’m letting it hang on our mantle for St. Patrick’s Day. How’s that for multi-purpose party decor?

 

 

 

*This post contains affiliate links. Read more about about affiliate links in my sidebar.

Easy, Inexpensive Favor Bags

Paper Bag Party Favors | Five MarigoldsDress up a common paper lunch bag to be something extra special!  EClaire needed to take favor bags to school for her half birthday (summer birthday problems!). I had a few awkwardly shaped items so I needed a decent-sized bag, but I didn’t want to spend much.

As usual, I headed to the Dollar Tree fro some paper lunch bags and doilies. Then, I secured them with these tiny craft clothespins that you can get at Hobby Lobby or here on Amazon. I love how these turned out, and you can make 40 for just $6. Next time, I love the idea of trying these for birthday party favors with colorful doilies and clothespins.

These would be great for Valentines, Birthday parties or even for quick and easy gift wrap for small gifts.

Paper Bag Party Favors | Five Marigolds  Paper Bag Party Favors | Five Marigolds Paper Bag Party Favors | Five Marigolds