Tag Archives: Birthday party

Tutu Birthday Party for my Two year-old

What could be better than a tutu birthday party for your little ballerina’s two year-old birthday?

For baby ‘Belle’s party, I wanted to do something that conveyed her love of dancing and tutus and looked special, but that was simple and inexpensive to put together.

First, for my $3 backdrop, I took 3 white plastic tablecloths from the dollar store for my backdrop.  I simple folded them in half length wise, then began rolling them up toward the fold. Once the cloth was rolled approximately 10″ from the fold, I began cutting the rolled tablecloth in strips approximately 3″ apart. Easy!Tutu Ballerina Birthday Party | Five Marigolds

I finished it off with the vintage bunting we re-use for the girls’ parties each year. I love how this small investment adds something special to every party we have for them.

Next, I layered the table with two tablecloths, sandwiched with some tulle. I had planned to make this an inexpensive “tutu tablecloth” but it didn’t quite turn out that way! No problem though – I still love the effect of the pink tulle as the focal point of the table. To finish it off, I placed the tablecloth over the top and bustled it at the center to better highlight the tulle.

Tutu Ballerina Birthday Party. | Five Marigolds

Finally, I placed a trifle bowl upside down and I placed her own baby tutu around the bowl. Then, I just placed the cake on top. Tutu Ballerina Birthday Party. | Five Marigolds

I’d ordered a the cake to looks similar this:

Frilly Cake

So, I was a little disappointed in the finished result from my local Target bakery.However, I really can’t complain for such an inexpensive cake…and really it looks so cute when it’s all propped out with this gold “2” candle and bunting.

Tutu Ballerina Birthday Party. | Five Marigolds

We served ballerina punch, pink Jelly Bellys and dipped marshmallows for a birthday-worthy sugar buzz.

I hope you like ‘Belle’s tutu party fit for a two year-old ballerina. Thanks for stopping by!

Tutu Birthday Party | Five Marigolds

Advertisements

Minecraft Steve Lego Birthday Party Favor

This year, Dub wanted his birthday to be all about Minecraft. He’s also really into Legos, so a Lego Steve seemed like an appropriate favor for the goodie bags.

I did a lot of research trying to find an easy way to to this. To be honest, I was hoping there would be a sale of Minecraft Lego lots on ebay that would allow me to phone this one in, but it was not to be.

So, I ended up making Steve myself using the Lego Pick-A-Brick feature.

Minecraft Steve Lego Favor | Five Marigolds

While you can do this in-store if you have a Lego retail location near you, they have a varying selection, so I saved myself the trip and did my shopping online. This is where I insert my Lego PSA – I found out after I placed my order that Pick-A-Brick orders can take up to 18 business days! That’s almost a month! So, this favor only really works if you are planning out by at least a month to ensure your Bricks get to you in time.

Here’s what I ordered to make 15 favors:

Item#, color  – quantity

  • 300423, blue – x30
  • 4113915, yellow – x15
  • 4155708, yellow – x15
  • 4163696, light blue – x15
  • 4179833, light blue – x15
  • 4211210, brown – x15
  • 4243821, green – x15
  • 4271949, brown – x15
  • 4579260, yellow – x15

For the pick axe, I had to go to ebay where I got a great deal paying $1.47 total for 15 axes. That brought the total to $26.21 for 15 favors, or $1.74, each. (I didn’t see any swords or pick axes in the Pick-A-Brick section when I was ordering. They do have a “mini Fireman’s axe” or a “warrior weapon,” though.)

Then, I went to work making  a face for Steve in PhotoShop. I measured it to the size of the 2×2 Lego and then I printed it on Avery label paper. Removing the paper backing first,  I cut down each face sticker to the exact size and then replaced it on a small square of the paper backing to place in the favor bag.

Steve Lego Face Free Printable | Five Marigolds

I took a photo of the complete Steve to include with all the kits.
Minecraft Steve Lego Favor Insert Printable web| Five Marigolds

I placed the Legos in a small jewelry ziplock bag. Then, I made a simple tag that I stapled to the top of the sealed bag as a finishing touch.

Minecraft Lego Steve Favors | Five Marigolds

This was a huge hit among the 6 and 7 year old crowd!

Thinking of making a Lego Steve for your Minecrafter’s party? You can get a head start by downloading Steve’s face here (compatible with Avery 5260* labels), the finished Steve image inserts here, and the favor tags here.  Enjoy!

MORE FREE MINECRAFT PRINTABLES: Like these printables? Be sure to check out my other free Minecraft Printables here and here.

 

 

*Please read my affiliate link disclaimer in the sidebar.

Minecraft Birthday Party

This year, Dub wanted his party to be all about Minecraft. I didn’t want our home to look like it threw up Minecraft-licensed decor, so I went with something that we all could get excited about. We weren’t having a big celebration at home either, so I wanted to keep this simple and fairly inexpensive. Minecraft Birthday Party | Five Marigolds

First: the centerpiece du jour: his Minecraft cake. Kind of a boring concept, but this is a representation of THE pixelated cake featured on the video game. I was more than happy to outsource this portion of the party and Dub was in love with how it turned out. It was exactly what he wanted!

Minecraft Birthday Party Cake | Five Marigolds

Next, I created the theme using a brown dollar store tablecloth and some tissue paper “grass.” Super inexpensive for one package to cover this table, and the kids were fascinated by this!

I created a simple and inexpensive tissue paper bunting that added some visual interest in the party theme color (tutorial here).

Finally, I like to decorate with party favors, because it’s the decoration that cleans itself up as the guests leave.

I bought some green lunch bag sized paper bags and cut felt into the shape of a Creeper face. Really, this would have been so much easier with black construction paper and my Silhouette SD, but black felt was what I had on hand so that’s what I used.

Minecraft Birthday Party Favors | Five Marigolds

I filled the bag with goodies like gold and silver ore, Mike & Ikes, a growing green bug, and I repurposed my Minecraft Valentine printable to wrap boxes of Nerds candy.

The highlight of the goodie bags was a Lego Steve creation I made with the help of Pinterest and the Lego Pick-A-Brick tool. Stay tuned, I’ll post the tutorial on that soon!

Minecraft Birthday Party Favors. | Five Marigolds

Tutorial: Tinsel Tassel Party Banner

I absolutely love the look of these tinsel tassel banners for party decor. Even better? They’re super easy and inexpensive to make.

Dub really wanted a Minecraft-themed birthday party, but I didn’t want a licensed decor explosion, so I began thinking of ways to decorate with color. With lots of Pinterest inspiration, I decided I wanted to give this a try. However, I was surprised to find there aren’t a lot of tutorials out there so I am sharing a quick and dirty tutorial of my own.

I set to work on this particular banner with four colors of tissue paper, green, lime green, chevron and silver metallic (I linked to some examples because I initially had a hard time finding these).

1) First, I took a stack of 8 sheets of tissue in each color and cut them the short length of the pre-cut sheets (approximately 20″) and cut them about 8″ wide.Tinsel Tassel Banner Tutorial | Five Marigolds

2) I then folded the stack of sheets in half and began cutting them in 1/4″ strips, stopping about 1″ from the fold. I used a rotary cutter and mat to make quick and more precise work of this, but regular scissors will do.

Tinsel Tassel Banner Tutorial | Five Marigolds

Tinsel Tassel Banner Tutorial | Five Marigolds

3) I then unfolded the papers and, taking 2 sheets at a time, began rolling them tightly at the center. Once each set of 2 was rolled at the center I began gently twisting the rolled portion. Once it was lightly twisted I folded it in half and began twisting the rolled portions together. When you’re done it will look something like this. Perfectly imperfect.Tinsel Tassel Banner Tutorial | Five Marigolds

4) Thread the tassels through a string or ribbon. I made a single simple knot at each tassel to keep them in place.

Tinsel Tassel Banner Tutorial | Five Marigolds

All in all, this was a pretty quick and easy project that took me maybe 20 minutes total to complete. I also love that if you source your papers from the dollar store, you could complete three of these banners for just $4! (meaning, each banner is just over $1, with plenty of paper to spare for favors or gifts). I have a feeling various themed tinsel banners will be showing up at more parties around here!

Dub’s party is not for a few more weeks, so I’m letting it hang on our mantle for St. Patrick’s Day. How’s that for multi-purpose party decor?

 

 

 

*This post contains affiliate links. Read more about about affiliate links in my sidebar.

Princess Party Favors: Candy Necklace Cards

For Eve’s Princess Birthday Party, I was going for a generic princess feel rather than a Disney princess kind of feel. As part of that, I wanted to create some custom party favors. I didn’t really find anything out there I loved for purchase, so I went about creating my own.

You already saw the Candy Button Crown favors I made for the party. Today, I’m sharing the hit of the party – Candy Necklace Cards. I’d seen a similar concept online, but nothing princess themed. So, I went about creating these myself in PhotoShop, using hair and dress colors that somewhat inspired by Disney princesses, but with look that still felt sweet and unbranded.

Princess Candy Necklace Party Favors | Five Marigolds

I love how they turned out.  On the front I printed these sweet princesses on heavy cardstock.

On the back, a thank you note for attending Eve’s party, written in Jellyka Delicious Cake font.Princess Party Candy Necklace Favors Printable | Five Marigolds

I simply cut a slit on each side, then hooked the candy bracelet on the card.Princess Candy Necklace Party Favors | Five Marigolds

The best part? This favor is very inexpensive – 10 favors for just $1 when you buy the candy bracelets from the Dollar Tree candy section, like I did. Or, buy them in bulk. You can package them in clear cellophane from the craft store.

I have no shame in sharing that I’m already planning to recycle these babies for Valentine’s Day cards, bagged in cellophane . What do you think? Would your little princess love to receive these as a party favor or Valentine? Would you like a printable copy of this for your little girl? UPDATE: Download the free Princess Party Candy Necklace printable here! I would love to see these printables in action. Please be sure to send me images of your princess parties!Princess Candy Necklace Party Favors | Five Marigolds

Sweet Treat: Easy Homemade Candy Buttons

There’s just something about Candy Buttons. These nostalgic candies are surprisingly easy to make, and are perfect for birthdays, party favors, or just a fun sweet treat.

To make Candy Buttons, all you need to do is prepare a simple royal icing recipe. You can use the recipe listed on the can of Meringue Powder, but I used the following recipe, inspired by Sweet Sugarbelle:

What you’ll need:

  • 1 lb. confectioner’s sugar (4 3/4 cups)
  • Meringue powder (about 1/4 cup)
  • 1/3-1/2 cup water
  • 1-2 tablespoons flavored extract (I used almond extract because it’s what I had on hand, but there are tons of fruity flavors at the craft store that would be fun to try!)
  • Food coloring
  • Electric mixer
  • Freezer paper
  • Icing bag and small round tip (or a resealable bag with a tiny corner cut off would work in a pinch)supplies

To prepare:

  1. Whisk the dry ingredients together.
  2. In a separate measuring cup, mix the flavored extract into the water.
  3. Slowly begin pouring the liquid mixture into the powder mixture while it mixes.
  4. Mix the frosting on medium-high speed until the frosting forms stiff peaks (around 7 minutes)
  5. Add food coloring to achieve desired color. (I first made pink frosting, and later added a few drops of blue to make purple to get two colors out of one batch.)

Next, tear off a sheet of freezer paper – large enough that you can fit a large batch of buttons on (you won’t cut the paper until these are dry).

Fill your pastry bag (I used my Pampered Chef Decorator Bottle Set*) with frosting and twist the top, removing excess air. Now, simply pipe evenly sized dots across the paper. If possible, print a template in advance and place it below the freezer paper. Be sure that the design will fit into your final packaging. If you’re using pretzel bags for your packaging, your design will need to be approximately 2.15 x 5″ to fit the pretzel bags I would be placing them in.Candy Button Crown Template | Five Marigolds

Candy Button Heart Crown Party Favors _ Five Marigolds_45mLet the Buttons sit overnight to dry. Any excess frosting will keep in a resealable bag refrigerated for two weeks.

Now for the fun! Once the Buttons have set up overnight, you can begin cutting the freezer paper to your desired shapes.Candy Button Heart Crown Party Favors _ Five Marigolds_35m

Package your Candy Buttons for the occasion. I placed them in Wilton pretzel bags that I got at JoAnn’s for $1.37 using my 40% off coupon. Think of the possibilities! Birthday party favors, Valentines, and more!Candy Button Heart Crown Party Favors _ Five Marigolds_15m

Valentine's Candy Button Hearts _ Five Marigolds5m

Valentine Candy Buttons

 

In addition to being featured on the fab blogs listed on the right of this blog, this post was also featured on Huckleberry Love.

Puppy Dog First Birthday Party

For Dub’s first birthday, I knew I wanted to do a puppy dog theme.  Now, I just love a good themed birthday, but really we don’t go overboard for parties. This was especially true for his first – we just invited a few family members and held at his grandma and grandpa’s home, near where most of our family lives.

We made puppycakes using this tutorial from Family Fun magazine. My photography at that time leaves very little to be desired, but you get the idea.

puppycakes

And, of course, gave puppy chow as party favors with hangtags that read, “It’s been dog-gone fun!”

its been doggone fun IMG_4091

 

amzn_assoc_placement = “adunit0”;
amzn_assoc_enable_interest_ads = “true”;
amzn_assoc_tracking_id = “fivemari-20”;
amzn_assoc_ad_mode = “auto”;
amzn_assoc_ad_type = “smart”;
amzn_assoc_marketplace = “amazon”;
amzn_assoc_region = “US”;
amzn_assoc_linkid = “dc1662ad3c506cd5c69c1b6d204e8e67”;

//z-na.amazon-adsystem.com/widgets/onejs?MarketPlace=US